Location: Injection mould,thin-wall mould,container mould,pallet mould,bucket mould,SMC mould,crate mould » Injection Moulds » Injection pressure

Injection pressure

Posted by admin on July 20th, 2012

Pressure drives

the melt Pressure is the driving force that overcomes the resistance of polymer melt (see Pressure-driven flow), pushing the polymer to fill and pack the mold cavity. If you place a number of pressure sensors along the flow path of the polymer melt, the pressure distribution in the polymer melt can be obtained, as schematically illustrated in Figure 1 below.

Page Link: https://www.zhilianmould.com/blog/injection-pressure/
Copyright © Please mark the original information when reserved!

You may also like:

Comments are closed.