Location: Injection mould,thin-wall mould,container mould,pallet mould,bucket mould,SMC mould,crate mould » Injection Moulds » How to select the suitable injection molding steel?

How to select the suitable injection molding steel?

Posted by admin on July 10th, 2015

How to select the suitable injection molding steel?
The different plastics and processing properties of the plastics lead to different loads, which must be taken into consideration not only in the design but also in the selection of the material required for molds. Steel has the ideal qualifications, because its properties can be modified by alloying elements, special production processes, and heat treatment, and it can be adjusted to various requirements. Moreover, the possibility exists of using surface treatment to add to the already advantageous properties of the steels and thereby suits the requirements for long mold life and economical manufacture.

The most important requirements for the injection mold steels are:
1) High compressive strength expected even at high temperatures.
2) Wear resistance
3) Great toughness
4) Corrosion resistance and good thermal conductivity.
Also, the mold maker experts the following properties:
1) Good machineability
2) Good hobbing capabilities (where required).
3) Dimensional stability during heat treatment.
4) Good polishing properties.
5) Surface texturing without difficulties (where required).
Finally, the mold steel should be readily available, a requirement that demands a standardization of sizes and universally suitable types of steel.
Considering the various stresses to which the mold material is subjected,it is understandable that not all conditions can be met with one grade of steel. The experiences of many years and the close cooperation between steel producers and consumers have led to the development of mold steels that can be divided into the followinggroups: nitriding steels; casehardened steels; prehardened steels; fully hardened steels; corrosion-resistant steels; maraging steels;hard material alloys.

Posted by Mandy Tang

E-MAIL:  sales01@zhilianmould.com

SKYPE:  live:740851003

WEB:  www.zhilianmould.com  www.zlmould.en.alibaba.com

Page Link: https://www.zhilianmould.com/blog/how-to-select-the-suitable-injection-molding-steel%ef%bc%9f/
Copyright © Please mark the original information when reserved!

Comments are closed.